Kichler 43686 Manual de usuario descargar pdf

IMPORTANT SAFETY INSTRUCTIONS

LIGHTED BULB IS HOT!

WARNING: To reduce the risk of FIRE or INJURY TO PERSON:

• Turnoffandallowtocoolbeforereplacingbulb.

• BulbgetsHOTQUICKLY!Contactswitchonlywhenturningoff.

• DONOTremaininlightifskinfeelswarm.(Lightisintense,

 maycause“sunburn”)

• DONOTlookdirectlyatlightedbulb.

• Keepmaterialsawayfrombulbthatmayburn.

• UseONLYwithwattagespeciedorlower.

• DONOTtouchbulbatanytime,useasoftcloth.Oilfromskin

 maydamagebulb.

• DONOToperatexturewithmissingordamagedglass.

1) Passxturewirefromeachcouplingontopofxture 

 throughonestemforeachsideandscreweachsteminto

 eachcoupling.NOTE: Threadlockingcompoundmustbe

 appliedtoallstemthreadsasnotedwithsymbol(3)to 

 preventaccidentalrotationofxtureduringcleaning, 

 relamping,etc.

2) Passxturewirethroughremainingstemsandscrewstems

 together.

3) Threadonesmallthreadedpipeintoendofeachsmallloop.

4) Passxturewirethroughrstloop.Threadonerstloop

 ontoendofeachlaststem.

5) Passxturewirethroughsecondloopandthroughholein

 canopy.Passthreadedpipeatendofsecondloopthrough

 holeincanopy.

6) Passxturewirethroughholeinlockwasher.Thread 

 lockwasherontoendofthreadedpipeprotrudingfrom 

 insidecanopy.

7) Passxturewirethroughholeinhexnut.Threadhexnutonto

 endofthreadedpipe.

8) Repeatsteps5-7toattachlaststemtocanopy.

9) Attachchainlinktosmallloopatendofeachstemandto

 eachlooponcanopy.

10)TURN OFF POWER.

IMPORTANT:Beforeyoustart,NEVERattemptanywork

 withoutshuttingofftheelectricityuntiltheworkisdone.

 a) Gotothemainfuse,orcircuitbreaker,boxinyour 

  home.Placethemainpowerswitchinthe“OFF” 

  position.

 b) Unscrewthefuse(s),orswitch“OFF”thecircuitbreaker

  switch(s),thatcontrolthepowertothextureorroom

  thatyouareworkingon.

 c) Placethewallswitchinthe“OFF”position.Ifthexture

  tobereplacedhasaswitchorpullchain,placethosein

  the“OFF”position.

11)Findtheappropriatethreadedholesonmountingstrap.

 Assemblemountingscrewsintothreadedholes.

12)Attachmountingstraptooutletbox.(Screwsnotprovided).

 Mountingstrapcanbeadjustedtosuitpositionofxture.

13)Makewireconnections(connectorsnotprovided.)Reference

 chartbelowforcorrectconnectionsandwireaccordingly.

14) Pushxturetoceiling,carefullypassingmountingscrews

 throughholesincanopy.

15) Threadknurlknobsontomountingscrews.Tightenknurl

 knobstosecurexturetoceiling.

16) Raiseglassuptoxture.Passtopofglassthroughholein

 bottomofxturebody.Passholeinglassoversocket.

17) Slipspaceroversocket.

18) Attachsocketringtosocketringtool.

Connect Black or

Red Supply Wire to:

Connect

White Supply Wire to:

Black White

*Parallel cord (round & smooth) *Parallel cord (square & ridged)

Clear, Brown, Gold or Black

without tracer

Clear, Brown, Gold or Black

with tracer

Insulated wire (other than green)

with copper conductor

Insulated wire (other than green)

with silver conductor

*Note: When parallel wires (SPT I & SPT II)

are used. The neutral wire is square shaped

or ridged and the other wire will be round in

shape or smooth (see illus.)

Neutral Wire

DateIssued:10/17/14 IS-43686-CB

INSTRUCTIONS

For Assembling and Installing Fixtures in Canada

Pour L’assemblage et L’installation Au Canada

We’re here to help 866-558-5706

Hrs: M-F 9am to 5pm EST

MOUNTINGSTRAP

PATTEDEFIXATION

CANOPY

CACHE

KNURLKNOB

BOUTONMOLETÉ

SMALLLOOP

PETITEBOUCLE

STEM

TIGE

CHAINLINK

MAILLONDELACHAÎNE

HEXNUT

ECROUHEXAGONAL

LOCKWASHER

RONDELLEDEBLOCAGE

19) Raisesocketringtoolwithsocketringattacheduptoxture

 Passsocketringtoolwithsocketringattachedthroughholein

 glass.Threadsocketringontosocket.Tightensocketringto

 secureglassinplace.(DONOTovertighten.)

20) Insertrecommendedbulb.CAUTION: DONOTtouchbulb

  withbarehands.Ifthishappens,cleanbulbwithdenatured

  alcoholandalintfreecloth.

21) Slipglasssleeveoverbulb.Carefullythreadglasssleeve

  ontosocket.(DONOTovertighten.)

GLASS

VERRE

SOCKETRING

ANNEAUDELADOUILLE

SPACER

ENTRETOISE

SOCKETRINGTOOL

OUTILDEL’ANNEAUDE

LADOUILLE

FIXTUREBODY

LUMINAIRE

BULB

L’AMPOULE

GLASSSLEEVE

MANCHONDEVERRE

1 2

866-558-5706 1

Indice de contenidos

Pagina 1 - 866-558-5706

IMPORTANT SAFETY INSTRUCTIONSLIGHTED BULB IS HOT!WARNING: To reduce the risk of FIRE or INJURY TO PERSON:• Turnoffandallowtocoolbeforereplacin

Pagina 2

IMPORTANTES CONSIGNES DE SÉCURITÉ UNE AMPOULE ALLUMÉE EST BRÛLANTE !AVERTISSEMENT: Pour réduire les risques D’INCENDIE ou DE BLESSURE:• Éteindreet

Mas documentos para Encendiendo Kichler 43686

a Ver el documento Kichler 43686 Manual de usuario

Kichler 43686 Manual de usuario (2 paginas)

Comentarios a estos manuales

Sin comentarios

Kichler 43686 Manual de usuario

Busca en linea o descarga Manual de usuario para Encendiendo Kichler 43686. Kichler 43686 Manuel d'utilisation Manual de usuario

Indice de contenidos

Mas documentos para Encendiendo Kichler 43686

Comentarios a estos manuales

Relacionado con productos y manuales para Encendiendo Kichler 43686